Trustable supplier provide PLC Environmental Simulation Constant Temperature Temperature Humidity Test Chambers


Features / Benefits more than you can get from other supplier in China
1)Delicate touch and excellent user experience
2)Unique and compact design,top grade appearance,stable performance and easy operation.
3)Can simulate a wide range of temperature and humidity environments
4)Capable of testing large components, assemblies, and finished products
5)Customized sizes and configurations available
6)1 year warranties


Technical Parameters of Temeperature Humidity Test Chamebr KMH-408R:
Workspace volume: (W)700 x (H)750 x (D)800mm
Exterior size: (W)980 x (H)1940 x (D)1740mm
Temperature range: -20~-150°C
Temperature constancy: ±0.5°C
Temperature uniformity: ±2.0°C
Temperature change rate: -20~+100°C within 35 minimum (with empty load), +20~-20°C within 45min (with empty load)
Humidity range: 20 - 98% RH
Humidity uniformity: ±3.0% RH
Humidity constancy:  ±2.5% RH
Insulation:
Exterior, baked painting steel or stainless steel (SUS304)
Interior, mist finishing stainless steel (SUS304)
Insulation material, rigid polyurethane foam and glass fiber
Door: Heating wire was installed to prevent condensation in case of low-temperature
Inspection window (W X H): 2 sets 2, 470 X 570mm inspection window, made of multi-layer coated hollow electric glass, effectively insulation and prevents condensation
Light device: 11W/220V AC X 1 installed on the inspection window
Water outlet: Water outlet available for condenser
Water replenishment: Water pump





Features:
Standard configurations:
Sight window X 1
Cable port (port Ø 50mm) X 1
Shelves X 2
Chamber lamp X 1
Power cable X 2m
No fuse breaker, over-pressure, over-heat and over-current for compressor, over-temperature, overloading of blower, dry heat-protection
Optional accessories:
Cable port: Ø 100mm is available
Shelves
RO-type water purifier: R-80/day
Provided to keep the humidifying heater and wet bulb wick free from scale
Inner glass door with operating port: A glass door can be provided behind the main door so that specimens can be observed
Two operating ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door
Dehumidifier: The rotation regenerating dehumidifier M-120 ensures precise control of low-humidity (5° C 5% RH) for electronics


Minimum Order Quantity: 1 set
Payment terms:T/T 50% advance, balance before shipment

The first order of a new customer will gain 10% discount, and trade agent also welcomed.
We will make sure our trade agents' interest.


Installation environment 
Distance from the wall to both sides and rear of chamber more than 800mm, to the front more than 1500mm. Provide independent power distribution switchgear and humidification condensate drains, and external power connector device is necessary  
Ground level, well-ventilated , non- flammable, explosive, corrosive gases and dust
No strong electromagnetic radiation nearby
With floor drain ( less than 2 meters from the refrigeration unit )
Venue floor load capacity : not less than800kg/m2
Leave adequate space for maintenance

Packaging
Each set protected with resin fiber and PP film, then put into strong wooden case with operation mannual and video inside.


After-sale service

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

Specifications for All Models of Climatic Test Chambers